Static bollard MPIE5 from Motorline, made of stainless steel, for access control and traffic calming, with LED safety lighting and a diameter of 204 mm.Supplied with the weatherproof stainless steel bollard, an automatic twilight switch for the integrated 24 Vdc LED lighting (RGB), and a backup battery in case of a power failure. The static bollard is connected via a 110/230 Vac power supply to ensure the bollard's visibility even in the dark.Available in three heights: 370 mm, 570 mm, or 785 mm.

Electrically retractable MPIE10 bollard from Motorline made of stainless steel for access control and traffic calming with LED safety lighting and a diameter of 204 mm.Supply includes the weatherproof stainless steel bollard, the programmable control unit, two FALK 4-channel radio remote controls, a twilight sensor for the integrated LED lighting and an emergency battery in case of a power failure. Any number of additional remote controls can be programmed to extend and retract one or more bollards individually or together. ModelMPIE10/400MPIE10/600MPIE10/800 Lifting height0-370 mm0-570 mm0-785 mm Mounting depth870 mm1080 mm1280 mm Diameter204 mm204 mm mm204 mm mm

Automatic chain barrier CHAINLIFT from Motorline, consisting of two chain lift columns, as an easy-to-install solution for access control.The chain lift columns are equipped with an integrated flashlight to signalize the process of raising and lowering the chain and powered via a standard 110/230VAC connection, the internal operating voltage is 24VDC. The standard finish is NOIR 100 SABLÉ.The scope of delivery includes a plastic chain with a length of 8 meters with a maximum tensile load of 70 kg, two FALK radio remote controls and a pair of MF30 photocells for setting up a safety light barrier.

The new electric barrier syste TURBO is a ready-to-use, complete system with a low-wear brushless motor, integrated control electronics with two radio remote controls, and a safety light barrier. The opening and closing of the optional tollgate is signaled by a flashing light (RGB). Any number of additional remote controls can be programmed.The textured paint finish corresponds to NOIR 100 SABLÉ. Optionally, barrier operation via app, telephone, or SMS commands is also possible using the MCONNECT or M200 control systems from Motorline.

The ZUMA BL electric barrier system is available with or without a barrier arm. Two extendable aluminum barrier arms, ranging from 2.5 to 6.0 meters in length, are available as needed. Power is supplied via a 230Vac connection, and the operating voltage for the brushless motor is 36Vdc.The galvanized steel housing with a lockable access panel provides reliable protection against the elements. Two remote controls and a photocell are included.

The optional extendable barrier arm of the ZUMA BL8 electric barrier system can be individually adjusted to a length between 550 and 800 cm. The barrier arm can also be equipped with integrated LED safety lighting, including an automatic twilight sensor.The barrier, with its low-maintenance, brushless drive, operates at 36Vdc and is powered via a standard 110/230Vac connection. The barrier housing, made of galvanized sheet steel, is weatherproof and features a lockable maintenance hatch. Two photocells for a light barrier and two radio remote controls are included.

The SIGMA BL4 and SIGMA BL6 barrier systems have a housing made of galvanized sheet steel, which is further reinforced by an outer skin made of aluminum. In addition to the LED lighting integrated into the barrier arm (optional), the housing is also equipped with an RGB flashing light on the entry and exit sides to visually enhance operational safety.The extendable aluminum barrier arm can be individually adjusted within a range of 250 to 600 cm. An automatic twilight sensor, two radio remote controls, and a photoelectric sensor are included in the mounting kit. Power is supplied via a 110/230VAC connection; the internal operating voltage for the brushless barrier motor is 36Vdc.

This electric barrier system from the SIGMA BL S5  series features an aluminum barrier arm in the form of a suspended grid. The maximum length of the suspended grid is 500 cm. Intermediate lengths from 300 to 500 cm are available at no extra charge and are factory-fitted to specifications.As with all SIGMA models, the barrier housing is made of aluminum-reinforced and galvanized sheet steel and is equipped with an RGB flashing light that visually indicates when the barrier is open and closed. Two remote controls and a safety light barrier are included.

The SIGMA BL A5 is an electric barrier system with an aluminum folding boom. The hinge divides the barrier boom in the middle of its length. When determining the barrier length, the total height when the barrier is open must be taken into account. The maximum barrier length is 500 cm. Individual shortening between 300 and 500 cm can be carried out ex works at no extra charge, with the hinge dividing the barrier into two equal sections. The clearance height for a barrier length of 3 meters (1.5 m bend length + 0.85 m barrier installation height), for example, is approximately 235 cm. This means that the barrier system can also be used to prevent taller vehicles such as vans or trucks from entering. As with all SIGMA models, the barrier box is equipped with flashing lights and comes with two remote controls and a pair of photocells for an optional light barrier.

Electric door opener ROSSO EVO for sectional garage doors with an area of up to 18 sqm and a maximum door height of 3200 mm.Two steel guide rails with traction carriages are available, with either chain or belt drive, in lengths of 3200, 3600, and 4000 mm. The rails are split into two sections for transport and easier handling.The programmable garage door opener has integrated garage lighting and comes with two FALK radio remote controls.Optionally, a wall switch and an external key release for door thicknesses up to 40 mm are available, and like all Motorline products, the ROSSO EVO sectional door opener can also be operated via the MCONNECT BRIDGE using a mobile phone (free MCONNECT app for Android or iOS).

The FORT sliding gate operator is available in two versions: with a 24 Vdc drive for gates with a total weight of up to 400 kg, or with a brushless 36 Vdc motor for gates weighing up to 500 kg (FORT-BL). The height of the gate operator can be between 1000 and 3000 mm. In addition to an integrated flashing light, the sliding gate opener features a height-adjustable drive pinion for adjustment to the rack guide. The standard paint finish is NOIR 100 SABLÉ, all other CLASSIC RAL colors are available at no extra charge (please note longer delivery times).Power is supplied via a 110/230Vac connection, and the operating voltage is 24 or 36Vdc. The gate operator can be optionally equipped with a 2Ah Li-Ion battery to ensure operation even in the event of a power failure. The scope of delivery includes 2 radio remote controls and a light barrier with two photocells. Suitable racks are available as an option. Like all Motorline products, the gate operators are also compatible with the MCONNECT or MCONTROL automation solutions, allowing the gate opener to be controlled remotely or locally via 4G LTE or an app for Android and iOS.

The BRAVO 500 sliding gate operator is suitable for gates weighing up to 500 kg. The motor, with its grease-lubricated gearbox, operates on 110/230VAC with a power output of 280W. The opening speed is 156 mm/s. The scope of delivery includes two radio remote controls and a light barrier with two photocells. Matching rack and pinion drives are available as an option.Like most products in the Motorline portfolio, these gate operators are also compatible with the M200, M250, or MCONNECT automation solutions, allowing the gate opener to be operated via mobile phone or the internet. This enables reliable monitoring and control of gate entrances not only locally but also remotely via app or SMS.

The SLIDE 800 sliding gate operator opens and closes sliding gates with a maximum total weight of 800 kg. The motor, with its grease-lubricated gearbox, operates on 110/230VAC with a power output of 370W and a torque of 550N. The operating speed is 186 mm/s.The complete solution includes two FALK remote controls, the MC50 control unit, and the MF30 photocell. Matching rack and pinion drives are available as an option. MOTORLINE gate drives support the MCONTROL and MCONNECT automation solutions for digital control via mobile phone or app from home or on the go.

The GALO electric gate operator is designed for sliding gates with a total weight of 600 kg, 1200 kg, and 2200 kg. It features a torque between 450 N and 1400 N and a brushless, low-maintenance 36 Vdc motor with a power output of 260 to 430 W. The power supply is 110-230 Vac, and the durable motor moves the gate at a speed of 120 to a maximum of 450 mm/sec (GALO600 Speed).The delivery includes two remote controls (any number of additional ones can be programmed), as well as an MF30 light barrier, the MC50 electronic control unit, and mounting hardware. In addition to the classic radio-based remote controls (433.92 MHz), there are a variety of control and monitoring solutions available via WiFi or the mobile network (4G LTE).

The STARK series of sliding gate operators, with model variants STARK4, STARK6, and STARK8, was specifically developed for heavy industrial gates weighing between 4 and 8 tons. The entry-level model is designed for gates weighing up to 4,000 kg, while the most powerful variant can handle up to 8,000 kg. The standard power supply and operating voltage is 400 VAC; a 230 VAC version is available at an additional cost. The reliable motors are characterized by their high torque. The package includes two radio remote controls and a light barrier with two photocells. An integrated flashing or continuous light signal indicates when the gate is opened, closed, or enabled. Suitable rack and pinion drives are available as an option. For extended control options via mobile phone, PC or tablet, the electric gate drives are also compatible with the MCONTROL and MCONNECT automation solutions. Furthermore, contact loops, key switches, keypads or coded credit cards are optionally available for controlling the sliding gate drive.

LINCE Electric Gate Opener (1 set consisting of one or two opening arms) for single or double-leaf swing or garden gates with a range of motion of 300, 400, and 600 mm for gate leaf widths up to 2500, 3000, and 4000 mm. The LINCE-24V model variant with a 24Vdc operating voltage can be powered either by a 24Vdc DC power supply or, using the integrated voltage converter, connected to a standard 110/230Vac power supply. The set includes the programmable electronic control unit MC52 (110/230VAC) or MC62 (24VDC), two FALK remote controls, and an MF30 photocell set for safe operation.

The MOTORLINE electric gate opener JAG is designed for single or double swing gates with widths of up to 300 cm and 400 cm and is available with an operating voltage of 110/230Vac (KIT JAG-52) or 24Vdc (KIT JAG-24V). Thanks to its integrated transformer, the 24Vdc version of the swing gate opener can be operated with either a standard 110/230Vac or a 24Vdc power supply. The scope of delivery includes the gate drive, control unit, two radio remote controls, and a safety light barrier. Additional control options via app or 4G LTE can be retrofitted using the optional MCONNECT (e.g., MCONNECT LINK) and MCONTROL (e.g., M200) expansion modules.

Entrance gates with leaf widths of up to 300 cm can be retrofitted with the PERSA electric gate opener from MOTORLINE. Unlike the LINCE and JAG gate openers, which have different stroke ranges for corresponding gate widths, this model uses a drive mechanism that moves along the profile of the automatic gate opener. The swing gate opener operates with individually adjustable movement limits for each leaf and, like all MOTORLINE swing gate operators, is available with an operating voltage of 110/230Vac (KIT PERSA-52) or 24Vdc (KIT PERSA-24V). Depending on the configuration, the scope of delivery includes one or two gate operators, the programmable electronic control unit, two radio remote controls, and a safety light barrier for automatic shutdown in case of interruption by people, animals, or vehicles.

The MCONNECT LINK module is used to connect to Motorline control units via the serial interface (USB-C). This allows Motorline control units to be retrofitted and remotely controlled via Wi-Fi, e.g., to issue opening and closing commands, configure parameters, and display the status of doors, gates, or barriers as well as their peripheral devices. Operation is conveniently carried out via the free MCONNECT app on mobile devices, tablets, or PCs.

With the MCONNECT SHUTTER WI-FI control module, existing electric blinds, garage doors, gate openers, bollards, and barrier systems can be retrofitted to open and close them using the MCONNECT APP – available for Android and iOS.One electric drive/device can be connected per module; the mobile application manages up to 12 connected drives in the free version. This allows even devices and drives not manufactured by Motorline to be controlled easily and intuitively using the MCONNECT APP. MCONNECT products also support the voice assistants Amazon Alexa and Google Assistant.

With the MCONNECT DUAL SWITCH receiver and control module - in conjunction with the MCONNECT APP (available for iOS and Android mobile phones) - two light sources per module can be switched on and off without having to spare the manual switch.Using the MCONNECT APP, routines can also be defined, such as time-controlled automatic switching on/off the lighting. MCONNECT products also support the voice assistants Amazon Alexa and Google Assistant.

The smart communication center MCONNECT BRIDGE enables remote control of up to 60 electrical devices, such as high-speed gates, garage doors, swing gates, as well as automatic barriers and bollards, awnings, blinds, or lighting in the office or at home, using the MCONNECT app (a user, device, and routine management application available for Android and iOS). Compatible with all MOTORLINE products without the need for additional receiver modules but it can also be used in conjunction with devices from other manufacturers by using one of the optional MCONNECT SHUTTER receivers (e.g., for the programmed and/or manual opening and closing of blinds, etc.) or MCONNECT DUAL SWITCH for lighting control. MCONNECT products also support the voice assistants Amazon Alexa and Google Assistant.

Even without an internet connection, the new 4G LTE communicator M200 from Motorline enables the remote control of doors, gates, barriers or the switching on or off of alarms and devices using an integrated microSIM card (not included in delivery) using free telephone calls, SMS, app or Bluetooth. The app supports up to 1000 users. Individual access authorizations, routines, status queries and protocols or even automatic notifications, e.g. when an alarm is triggered, can be set up in order to have control over the connected access systems or electrical devices at all times.

The MC1 is an electronic single-phase control baord (110/230VAC) with an integrated radio receiver and has specifically been developed for single-motor sliding and swing gates.