Steuerungstechnik für Torautomation

The MCONNECT LINK module is used to connect to Motorline control units via the serial interface (USB-C). This allows Motorline control units to be retrofitted and remotely controlled via Wi-Fi, e.g., to issue opening and closing commands, configure parameters, and display the status of doors, gates, or barriers as well as their peripheral devices. Operation is conveniently carried out via the free MCONNECT app on mobile devices, tablets, or PCs.

With the MCONNECT SHUTTER WI-FI control module, existing electric blinds, garage doors, gate openers, bollards, and barrier systems can be retrofitted to open and close them using the MCONNECT APP – available for Android and iOS.One electric drive/device can be connected per module; the mobile application manages up to 12 connected drives in the free version. This allows even devices and drives not manufactured by Motorline to be controlled easily and intuitively using the MCONNECT APP. MCONNECT products also support the voice assistants Amazon Alexa and Google Assistant.

With the MCONNECT DUAL SWITCH receiver and control module - in conjunction with the MCONNECT APP (available for iOS and Android mobile phones) - two light sources per module can be switched on and off without having to spare the manual switch.Using the MCONNECT APP, routines can also be defined, such as time-controlled automatic switching on/off the lighting. MCONNECT products also support the voice assistants Amazon Alexa and Google Assistant.

The smart communication center MCONNECT BRIDGE enables remote control of up to 60 electrical devices, such as high-speed gates, garage doors, swing gates, as well as automatic barriers and bollards, awnings, blinds, or lighting in the office or at home, using the MCONNECT app (a user, device, and routine management application available for Android and iOS). Compatible with all MOTORLINE products without the need for additional receiver modules but it can also be used in conjunction with devices from other manufacturers by using one of the optional MCONNECT SHUTTER receivers (e.g., for the programmed and/or manual opening and closing of blinds, etc.) or MCONNECT DUAL SWITCH for lighting control. MCONNECT products also support the voice assistants Amazon Alexa and Google Assistant.

Even without an internet connection, the new 4G LTE communicator M200 from Motorline enables the remote control of doors, gates, barriers or the switching on or off of alarms and devices using an integrated microSIM card (not included in delivery) using free telephone calls, SMS, app or Bluetooth. The app supports up to 1000 users. Individual access authorizations, routines, status queries and protocols or even automatic notifications, e.g. when an alarm is triggered, can be set up in order to have control over the connected access systems or electrical devices at all times.

The MC1 is an electronic single-phase control baord (110/230VAC) with an integrated radio receiver and has specifically been developed for single-motor sliding and swing gates.

Programmable receiver and control unit MC7 for the electric valance drive of the Motorline awning models COFRE 260 VOLANTE, COFRE 600 VOLANTE, and Exclusiv-Home EH7100.This control unit can also be used to switch other motors and consumers up to a power consumption of 500W on and off in conjunction with a compatible remote control.

The newly developed control unit MC50 is an electronic 230V single-phase control for the automation of sliding gates, sectional gates and barriers with 230V motors. The module, which is smoothly to configure, is installed in the sliding gate automation kits BRAVO 500, SILDE 800 and OL 1500 or OL 2000, among others.

The MC52 control unit is used to control two 110Vac/230Vac motors and is installed in the LINCE, JAG and PERSA swing door openers from Motorline. Whereas the up-and-over gate automations with 24Vdc motors use the MC62 control unit.

The MC60 electronic control unit with integrated radio receiver is used to automate sliding gates, sectional gates, barriers or bollards with an operating and output voltage of 24VDC.

The MC62 electronic control unit with integrated radio receiver is used to automate access control systems with two 24Vdc motors, such as the CHAINLIFT automatic chain barrier.

This programmable original Motorline receiver and control unit MC65 for awnings and other automation systems is the successor to the awning control unit MC6 (note the modified connection diagram) and can be used as a retrofit kit not only for Motorline or Exclusiv-Home awnings, but for practically all awnings for which original spare parts are no longer available. The control unit is housed in a junction box in the left end cap of the awning. For non-original Motorline or Exclusiv-Home products (EH6100 and EH7100), the junction box with the control unit can also be installed externally.In addition to the motor, this control unit can also be used to turn on and off any existing awning lighting (220Vac fluorescent tube) or another device with a power consumption of up to 500W. If the awning is already illuminated via LED strips, a corresponding voltage transformer is required (see single or double 12Vdc LED transformers). The control is compatible with the 4-channel FALK remote control, all radio remote controls from the MX series, and the WIWEATHER weather sensor.

45 mm diameter tubular motor from MOTORLINE with and without control board. The abbreviation FRA stands for an electronic control unit integrated in the engine, which is compatible with all remote controls from Motorline and which are optionally available. The tubular motor TUB50EFRA is the successor to the type TUB50R48, which was also installed in the projector ceiling lift from Braun.