Matching accessories for all Motorline sun protection solutions for the operation and installation of awnings, as well as for automating awnings against wind and weather damage.
Awning motors and awning controls, as well as straps and cords for counter-tension awnings and many other spare parts - including for Exclusiv-Home awning models - can be found under the Spare Parts section.
Original Motorline radio remote control FALK with 4-button function and LED indicator light.The programmable remote control operates on the frequency 433.92 MHz or 868 MHz and, at 64x32 mm, is roughly the size of a car key. It can be used in conjunction with the control unit MC65 or other Motorline receivers to control awnings, barriers, garage doors, garden doors, up-and-over doors or sliding doors. Also compatible with the Exclusiv-Home awnings EH6100, EH6400, EH7100, EH8100, EH8200, and EH8300 (433.92 MHz). Important note: New remote controls must first be paired with the respective device control (e.g., MC65 for Motorline or Exclusiv-Home awnings) and do not function automatically. The programming procedure can be found in the control unit's operating instructions, which are also available for download here in the shop for the corresponding control units.
Original Motorline MX95N 1-channel remote control including wall mount. The customer-programmable radio remote control from the MX series can be used to control all Motorline automation solutions. These include, for example, electrically operated doors, high-speed gates, bollards, and much more. Important note: Remote controls must always be paired with the corresponding device controls (e.g., MC60) and do not work automatically. The programming instructions can be found in the descriptions of the electronic control units, which can also be downloaded as a PDF.
Original Motorline radio remote control MX96N with 4 buttons and optical switching between the 5 channels. A practical transparent wall mount is included. The elegant and teachable remote control operates at 433.92 MHz and can be used in conjunction with the MC65 control unit or other Motorline receivers to operate awnings, garage doors, or garden gates. For example, with an awning with an electric valance, the extension and retraction of the main awning can be assigned to the first channel, the valance to the second, and the blinds and gate opener can be controlled with the additional channels. Important note: New remote controls must always be paired with the respective device control (e.g., MC65 for Motorline or MC6 for Exclusiv-Home awnings) and do not work automatically. The programming procedure can be found in the control unit's operating instructions, which are also available for download here in the shop for the corresponding control units.
The electronic and wired weather sensor BEWEATHER from Motorline for wind, sun and rain monitoring is used to automate awnings and roller shutters. In contrast to the radio-based weather monitor WIWEATHER, no additional receiver electronics are required, making it suitable for universal use to open or close roller shutters, blinds or awnings under defined weather conditions.
Motorline's SMART WIWEATHER radio-controlled and programmable weather sensor for automatic control of awnings and pergolas in sunshine, rain, snow, or wind. The radio sensor (no wired connection to the monitoring devices required) can communicate with one or more awnings simultaneously and does not require a permanent wired connection. This allows the sensor to be placed in a location exposed to the elements, ensuring optimal safety for the awning. Compatible with all awnings and sun protection solutions from Motorline and the EH series from Exclusiv-Home with the control units MC7, MC8, MC65, and MC65IP and their predecessors. Of course, if you purchase an awning at the same time, the sensor will be set up ready for use, so no further programming is necessary. It is important that the awning and wind sensor are activated at the same time, otherwise the awning will automatically close again a few seconds after opening for safety reasons.
Original Motorline wall bracket TC260V13 for the Motorline COFRE 136, COFRE 260, and COFRE 260 VOLANTE awning models, or Exclusiv-Home EH6100 and EH7100. The awning can be hung on the bracket on the rear side of the awning housing. The bracket measures 19 x 14 cm, weighs 0.84 kg, and is painted white (RAL 9010).
If you plan to fix the awning to the ceiling, you must first check whether ceiling mounting is possible for the respective model. The solid ceiling brackets are available in various widths and ensure optimal support and security for your awning in accordance with the technical requirements.Suitable for the awning models COFRE 260 (EH6100) and COFRE 260 VOLANTE (EH7100).Under "Features", the table shows whether, which, and how many of the optional ceiling mounts are required for installing the awning. If the awning model does not appear in the table, ceiling installation is not possible.
The MCT600S ceiling mount is used only once with the Exclusiv-Home EH6400 awning and the Motorline COFRE 600 awning in the size range from 5501 to 6500 mm. Further information on the type and number of awning mounts for ceiling mounting of the Motorline COFRE 600 awning can be found under "Features" in the technical product description.
The Motorline MCT600 awning bracket is required for ceiling mounting of the Exclusiv-Home EH6400 models and the Motorline COFRE 600, COFRE 600 VOLANTE, and MONOBLOCO 600 models. All Motorline cassette and folding-arm awnings are factory-installed with brackets for wall mounting. If the awning is to be mounted on a ceiling, optional ceiling mounting brackets are required (exceptions are the COFRE 136 cassette awning and the MONOBLOCO 300 folding-arm awning, which can be mounted on either the wall or the ceiling without additional accessories). The type and number of ceiling brackets required for the installation of the respective awnings can be found in the table under "Features".
The Motorline MCUT awning bracket allows the awning to be mounted on existing roof rafters and replaces the usual brackets for wall or ceiling mounting. The solid rafter bracket is screwed to the side of the rafter and guarantees secure and stable awning suspension. Suitable for the awning models EH6100 and EH7100 from Exclusiv-Home or COFRE 260 and COFRE 260 VOLANTE from Motorline.
High-quality aluminum pillar in lengths between 2,500 and 3,000 mm as supports for the BRISA SOLAR slatted awning or as supports for custom constructions. The support legs have a diameter of 125 x 125 mm. The support surface with four drill holes for ground attachment measures 200 x 200 mm. For a BRISA SOLAR slatted awning consisting of more than one module, the maximum permitted distance between two pillars is 5,000 mm. Other colors for the textured finish from the Classic RAL color spectrum are available at no extra charge. The color chart is available for download as a PDF document (see below).
High-quality aluminum pillars in lengths between 2,500 and 3,000 mm for the PERGOLA folding awning or as support supports for custom structures. The sturdy legs have a diameter of 80 x 40 mm. The support surface with four drill holes for ground attachment measures 260 x 180 mm. Standard finish RAL9010 Pure White or RAL Classic for an additional charge.
Optional metal cover TPERG19 to protect the motor, electronics, and awning fabric in widths between 1,000 and 6,000 mm for the Motorline PERGOLA folding awning. Motorline recommends adding one or two centimeters to the overall width of the awning, if possible, to ensure complete protection against water and dust. Standard finish: RAL9010 Pure White or RAL7016 Anthracite Gray; other RAL colors are available at an additional cost.