Electric projection screen PRO with a circumferential border of 4 cm width and without image masking in a 1:1 format. The square screen is the perfect choice for training and event rooms in which, for example, overhead projectors, data projectors and other output devices are used, as this unmasked projection screen can be used to display all known formats from 16:10, 16:9, 4:3 to 3:2 without loss.All models in the PRO series use a lightproof fabric with a black and lightproof back coating. The power connection via a 5 m long power cable is located on the right side of the white anodized aluminum housing - viewed from the front.It is mounted on the wall or ceiling using two flexibly movable mounting brackets or suspended using two movable eyelets located on the top of the housing. It is driven by a reliable tubular motor and controlled via a wired switch and/or a radio remote control. Both are included in delivery.Optionally, the screen can be automatically lowered and raised using a radio trigger as soon as the projector is switched on or off.

Electric projection screen PRO with fixed image masking in 16:9 format.All models in the PRO series use a lightproof fabric cloth with a black opaque back coating. The power connection via a 5 m long power cable is located on the right side of the white anodized aluminum housing - viewed from the front.The screen can be fixedly mounted on the wall or ceiling using two flexibly movable brackets or suspended using two movable eyelets located on the top of the housing. The integrated tubular motor is controlled via a wired switch and a radio remote control. Both are included in delivery.Optionally, the screen can be automatically lowered and raised using a 12Vdc or 110/240Vac trigger module as soon as the projector is switched on or off.

Using the screen configurator, the electric projection screen Rugby PRO is individually manufactured according to the specifications provided there.In addition to five different formats and screen materials for front and rear projection, various other masking options are available. The projection screen can be optionally equipped with a border and an additional black drop, depending on the selected projection surface. Furthermore, the screen's roll-up direction can be specified. In addition to the usual back-to-back roll-up, close to the wall (back fall), the screen can also be rolled over the front (front fall) or in the opposite direction for installation behind a beam or lintel.Power can be supplied via the left or right side of the housing, and a matte white or matte black finish is available. A wide range of control options and a variety of special mounting brackets are available if standard wall or ceiling mounting is not possible.After ordering and before the screen is manufactured, you will receive detailed documentation with all technical dimensions for review and final approval.

The electric tensioned projection screen Rugby PRO Tensio, with a freely definable diagonal between 69 and 203 inches, can be individually configured for any application. Not only can the size of the projection surface be set with millimeter precision, but there is also a choice of four different projection surfaces for front, rear, or double-sided projection, which are kept perfectly flat by the lateral cable tensioning system.Further options include the housing color, the screen winding position (close to or far from the wall), the left- or right-side positioning of the motor and therefore the power supply, and of course a wide range of image masking options with and without additional screen lead-in (blackdrop). Control can be optionally via radio, infrared, or a serial interface. In addition to the standard wall and ceiling mounting bracket (included), various special brackets for larger wall or ceiling distances are also available. After ordering and before the projection screen is manufactured, you will receive detailed documentation from us with all technical dimensions for review and final approval.

The newly developed electric in-ceiling screen INCELL can be configured not only in standard sizes and formats, but also with millimeter precision and individually according to the technical specifications and the planned application. Various projection screen fabrics with different fire protection classes and gain values are available for both front and rear projection. Also new iis a screen fabric that is equally suitable for front and rear projection. The image masking such as image borders and/or extra black drop - i.e. the additional black section between the upper edge of the projection area and the lower edge of the housing - can also be individually designed depending on the selected projection fabric. For installations close to the wall, there is also the option of determining the direction in which the fabric is wound up. The screen for ceiling installation is supplied with a manual wall switch as standard, radio or infrared-based screen controls and so-called automatic screen triggers are optionally available. After ordering and before the fabrication of the screen, you will receive detailed documentation from us with all technical dimensions for checking and final approval.

The electric in-ceiling screen Incell Tensio with cable tensioning system for a even tightening of the projection area is available in projection widths of up to 3150 mm and in different formats. As with all electric projection screens from the manufacturer Adeo, it is possible to order individual intermediate sizes in addition to the standard widths of 1850, 2150, 2650 and 3150 mm. The height of the projection results automatically from the width and the selected image format. It should be noted that the total casing size of tension screens is always significantly larger than the visible projection surface, in the case of the Incell Tensio it is each 260 mm per side. Projection fabrics, special screen features and accessories can be selected in the configurator. Mounting material and a wall switch are included. After ordering and before the fabrication of the screen, you will receive detailed documentation from us with all technical dimensions for checking and final approval.

The frame screen PREMIUM in 16:9 format with a frame width of 60 mm guarantees a 100% wrinkle-free projection surface. The aluminum profile of the frame screen can be put together like a picture frame, and the horizontal frame parts are not divided in the middle for reasons of design and stability. The velor black frame coating absorbs any disturbing reflections. The matt white fabric is coated black on the back and is absolutely opaque and ideally suited for normal and long-distance projections. The projection surface is attached to the frame using clips on the back and requires no prior knowledge. Due to the tensile force required to tension the screen, two people are recommended for assembly. An elegant and durable projection screen that blends harmoniously into any environment, whether in the conference room or home cinema. The mounting material for wall mounting is included. On request also available in special intermediate sizes or with eyelets for a suspended installation.

Also in the native 21:9 format, the PREMIUM frame screen with a frame width of 60 mm achieves perfect flatness. The velvet black coated profile of the frame screen can be put together very easily like a picture frame using corner brackets. The stretchable projection fabric is coated black on the back and is therefore completely lightproof. The fabric is also attached to the back of the profile segments using the clips supplied. Two people are recommended for assembly due to the pulling force required to insert the projection fabric. In order to ensure an evenly taut fabric tension, the vertical frame segments are also supplied in one piece and are not divided in the middle. The result is a timelessly elegant projection screen that blends harmoniously into any home cinema. The mounting material for wall mounting is included. On request also available in special sizes or with eyelets for a suspended installation.

Universal control unit with integrated radio and infrared receiver. The control unit can be used as a manual wall switch for controlling screens, projector lifts, roller shutters and other devices with a 220Vac drive or optionally as a receiver for a radio or infrared remote control for wireless operation of the connected devices. A maximum of 20 handheld transmitters can be paired with one control unit. The buttons for manual operation (Up, Stop, Down) are located on the side of the box. The input voltage is 220-240Vac 50Hz, the control is connected between the power supply and the consumer. Optional:Handheld transmitter (radio), max. 20 supportedHandheld transmitter (infrared), max. 20 supported

The Projection Screen Trigger PRO is plugged in between the projector's power supply and uses the voltage increase when the projector is switched on and the voltage drop when it is switched off to send the radio command to open or close the motorized screen.This solution is compatible with our motorized screen series PRO 16:9 and PRO 1:1

In conjunction with a compatible receiver unit, the wireless trigger UNIVERSAL can be used to control the screen using all projectors that do not have a trigger output (DC Out).The wireless trigger is plugged into the projector's power supply. When the projector is switched on or off, it sends a corresponding signal to the remote control unit UNIVERSAL, which is installed between the power supply of the screen, a ceiling lift, or similar devices. This ensures that the screen or ceiling lift extends or retracts automatically when the projector is turned on or off. A combination of multiple components, e.g., a screen and an electric ceiling lift, is also possible. This allows you to automatically control the screen and ceiling lift at the touch of a button (ON/OFF) using the projector's remote control. IMPORTANT: The UNIVERSAL wireless trigger also requires the UNIVERSAL remote control unit as a counterpart and is not compatible with screens from our range that are already equipped with an integrated receiver and remote control.

Rechargeable radio remote control for the motor screen series PRO and CONTRAST. For initial operation, the remote control must be paired with the screen (please see instructions). The hand-held transmitter for the screen is supplied with a wall bracket.

Remote control for the LUSSO motorized screen. The early models of the LUSSO screen series were delivered with infrared-based remote controls. Later models were equipped with a dual receiver that supports both radio (handheld transmitter model SM128) and infrared (handheld transmitter model SM118). When replacing the remote control, be sure to check the model name on the back of the transmitter. The handheld transmitter is delivered together with a practical wall bracket.

Make your home theater even more comfortable. Make the remote control for your electric screen redundant. Your projector will take control of your screen - with immediate effect and without any cables or set-up work.Simply plug the newly developed projector screen trigger LUSSO into the trigger output of the projector and the screen will drop and raise itself when the projector is switched on or off - as if by magic.This trigger is exclusively compatible with our product series LUSSO.

Manual hand switch for the current series of VISIVO PRO motorized screens. The switch can be plugged into the RS485 socket on the right side of the screen casing above the power supply in order to operate the screen manually using a cable.

The screen bracket PRO is used for wall and ceiling mounting of the PRO and CONTRAST screen series from VISIVO. The distance to the wall is 20 mm and to the ceiling 15 mm. Packaging unit: 2 pieces.Important: The mounting bracket has been modified and is not compatible with older series of the above-mentioned screen models. If in doubt, send us a profile photo of your screen housing and we will check compatibility before ordering.

Receiver and control unit including side lid with IEC socket, RS485 socket and synchronization button for all VISIVO screens of the PRO and CONTRAST series from year of construction 2016 and newer. The connection to the screen engine (100-240Vac) is made via a plug connection.Compatible with remote control PRO. After replacing the control board, existing remote controls or screen triggers must be paired newly.

35 mm tubular motor for all VISIVO screens of the PRO and CONTRAST series with tubular motor drive. Early years of construction of the VISIVO PRO series were driven by synchronous motors, which are no longer available.Before an exchange, the function of the motor should first be checked while not being conntected to the control unit by an expert. In most cases, the malfunction of the screen is not due to the motor, but to the control board.

Visualiser bag for OPTOMA DC550 and DC 554 Bag is empty and does not include the visualiser.

Electric ceiling lift COPERTO for suspended or standing projector installation, featuring a low installation height of just 12 cm. The ability to adjust the minimum and maximum stop positions allows even taller projectors to be easily positioned within the projector lift. This makes it suitable for concealed installation, for example, in a living area where a projector would be more of a nuisance on the living room ceiling on days when home theater isn't being used. The dimensions allow even a large home theater projector to be mounted upright in the lift or suspended from the lift base plate. The lifting range (maximum 96 cm) can be adjusted directly on the powerful tubular motor using the upper and lower stop points. The ceiling lift is delivered ready for use with a wireless remote control, wall switch, and 220V Schuko plug.

The height of this mobile projection table VARIO can be adjusted between 40 and 140 cm. Fine adjustments are made using a small hand crank located under the support surface, which measures 40 x 30 cm (width x depth).Thanks to its tripod base, the projector table is very stable. After use, the tripod can be folded down to a small, compact size and stored in a carrying bag. Due to its lightweight aluminum construction, the total weight, including the support surface, is only 2.5 kg.

The projector mount SPIDER is a classic among ceiling mounts. Whether you need a fixed or variable ceiling distance, this ceiling-mounted projector bracket is compatible with almost all projectors thanks to its adjustable arms with a hole spacing of up to 350 mm. The ceiling distance without the extension is approximately 13 cm and by using the optional extension (included), a variable ceiling distance between 42 and 65 cm is possible. The signal cable can be routed through the extension, screws for projector mounting are included. The bracket is available in white.